The models in Murogeopietra^® collection have different stone characteristics in terms of shape, size and surface finish, but they can all be matched together, both for interior and exterior stone walls. An infinite range of stone cladding types can be obtained by combining profiles, shades, textures, the special GeoFit^® pieces and the natural GeoBi mortars.

Each Murogeopietra^® Model comes with FLAT and CORNER PIECES obtained from different moulds, and therefore has a number of different individual pieces (between 300 and 600), of varying size (from 100 to 2,000 cm²) and with a thickness of between 3 and 7 cm.

Materials are packaged with JOINTS INCLUDED; joint dimensions for the stones are calculated as 1.5-2.5 cm.

Materials are packaged with JOINTS INCLUDED; joint dimensions for the stones are calculated as 1.5-2.5 cm.

Recommended installation types (variable according to the model):

INSTALLATION WITH JOINTS PLUS (Stone + GeoFit^®), complete with GeoFit^® BIG and SASSO according to the chart.
INSTALLATION WITH JOINTS of models which are not available in Murogeopietra^® PLUS version

DRY INSTALLATION PLUS (Stone + GeoFit^®), complete with Geofit^® SMALL, BIG and SASSO according to the chart.
DRY INSTALLATION of models which are not available in Murogeopietra^® PLUS version

In general when using a dry technique, consider 10-20% extra material when placing an order to compensate for the lack of joints. In order to avoid the need for a final touch up, mix the BLACK or BROWN coloured powder with the GeoColl^® adhesive (for the dark coloured models).

Due to their structure and colouring, the CASTLE and PANEL models CANNOT be mixed together or with other items in the collection (except for the P34 CREATIVO model). 
The CREATIVO P34 model is available in 2 formats (LARGE and SMALL), which CAN BE MIXED during INSTALLATION. MIXING IS ONLY POSSIBLE ON SITE due to packaging requirements.
The P12 and P16 models are prepared in PANELS of a variable size, which facilitate quick, dry installation.
Each model consists of FLAT and CORNER elements that are obtained from different moulds. Each model is therefore made of a number of different single pieces of variable dimensions.